About this decal
Each of these two decals shows four hooked dragon talons ripping down through jagged slash marks. The slashes are solid vinyl and the claws are drawn in outline, so your paint or glass shows inside every talon. Both pieces are cut as mirror images from one color of ORACAL 651, for either side of a rear window, opposite sides of a truck, or one panel.
- Cut vinyl, not printed
- ORACAL® 651 vinyl
- 6"–14" wide per decal
- Mirrored left and right pair
- 1 quantity = 2 decals
Size and fit
Choose a width from 6" to 14" in 2-inch steps. The size you pick applies to each decal in the pair. Every decal is taller than it is wide, about 1.38 times its width, so the 10" option is about 13.8" tall. Product photos show example placements; how much of a panel the pair covers depends on the size and spot you choose.
- 6"–8"about 8.3–11 in tallSide windows, toolboxes and small panelsSizes: 6" · 8"
- 10"–12"about 13.8–16.6 in tallTruck rear windows, tailgates and door panelsSizes: 10" · 12"
- 14"about 19.3 in tallBed sides, fenders and large body panels
A mirrored pair
The two decals are mirror images of each other. Spread them across a rear window, put one on each side of the vehicle, or set them side by side on one panel. This design comes only as a set; there is no single-decal option.
Material and color
Each decal is cut from a single color of ORACAL® 651 vinyl. Nothing is printed, and there is no background or clear film around the artwork.
The slash marks are solid vinyl, so the tear shows in the color you choose, while your surface shows inside each outlined claw and around the design. A color that contrasts with the paint or glass keeps the claw outlines easy to see. Screen colors are approximate and actual vinyl colors may vary.
What you receive
Two decals, one left and one right, in the size and color you selected, with pre-applied transfer tape for easier positioning. One quantity is one set, so a quantity of 2 brings four decals.
Where it works best
The mirrored pair works well spread across a truck's rear window, with one claw near each side of the glass.
It also fits bed sides and fenders, either one decal on each side of the vehicle or both side by side on a single panel, plus tailgates, toolboxes and other smooth spots with room for the claws.
Before you apply
Pick a smooth area big enough for the size you ordered, and make sure it is clean and completely dry.
Lay both decals out before you start so you can see how the pair will sit together.
