About this lettering
Three lines of custom lettering for both doors: USDOT, MC and GVW, or pick another prefix for each line such as GVWR, KYU, CA, TXDOT, VIN or custom text. Built for owner-operators, small and large fleets, farm and ag trucks, and non-CDL pickups and hotshot rigs that run under a USDOT number.
- Cut vinyl, not printed
- 3-line layout
- 5 letter heights, 2"–4"
- Pre-spaced with transfer tape
Your lettering layout
- Line 1USDOT 1234567
- Line 2MC 7654322
- Line 3GVW 80,000
Letter size
Choose a letter height from 2" to 4". The width follows your wording and the height you choose.
Three lines take more vertical room, so measure the door before you pick a height.
- 2" lettersabout 16 in wide
- 2.5" lettersabout 20 in wide
- 3" lettersabout 24 in wide
- 3.5" lettersabout 28 in wide
- 4" lettersabout 32 in wide
Marking requirements
Federal marking rules generally call for the carrier's legal name or single trade name and the USDOT number on both sides of the power unit, in a color that contrasts sharply with the background and readable from 50 feet in daylight. Some states and operations add their own markings.
We cut the lettering exactly as you enter it. We can't tell you which markings your operation needs or guarantee that a layout meets a specific rule, so confirm your own federal and state marking requirements before you order.
Material and color
Cut from ORACAL® 651 permanent vinyl. Only the lettering and design stay on the surface, with no printed background or clear film around it.
Choose from White, Black, Red, Cobalt Blue, Brilliant Blue or Green. Pick the color with the strongest contrast against your paint: white or a light color on dark doors, black or a dark color on light doors. Some colors may need a longer lead time.
Screen colors are approximate and actual vinyl colors may vary.
What you receive
One matching pair: a three-line set for each side, pre-spaced on transfer tape. Order 1 for one truck, or 2 or 3 pairs for more units.
Before you apply
Measure the flat area of the door around handles, trim and body lines before you pick a letter height. Finished width depends on the characters you type and the font you choose.
Clean the door with soap and water and an isopropyl alcohol wipe. The lettering arrives pre-spaced on transfer tape: position it, squeegee from the center outward, then peel the tape back slowly.
